Gallery
Description
Reviews
Q&A
Allparts

collapse expand iconDescription

Compensated bone saddle for acoustic guitar. 16 inch radius, length 75 mm, height 9 mm, thickness 3 mm.
Allparts Compensated Bone Saddle

Featured Articles

collapse expand iconReviews

Be the first to review the Product

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted4 months ago

    asked byTom

    fromJuno beach florida

    Will this work on a Martin D35?

    Will this work on a Martin D35?

    Open Reply - Gear-Support
    It might work, but not automatically — here’s what you need to know: The Allparts Compensated Bone Saddle is a generic, oversized blank that is intended to be sanded and shaped to fit your specific guitar’s saddle slot. Martin D-35 saddles are typically: Drop-in style (not glued in) Compensated for better intonation (angled or curved top) Approximately 1/8" thick (3.2 mm), About 2.9" long (73.5 mm) Usually have a radius matching the fingerboard (often 16") Therefore: If the Allparts saddle is thick enough and long enough (they usually are oversized), and you are willing to sand it down to match the height, thickness, and radius of your current saddle, then yes, it will work.

  • submitted10 months ago

    asked byKHED

    fromundisclosed

    Will this work for a Mitchelle D120BK?

    Will this work for a Mitchelle D120BK?

    Open Reply - Gear-Support
    I’m sorry, I don’t know. I don't have one to check. The dimensions are listed. You'll need to measure your guitar.

  • submitted2 years ago

    asked byTony

    fromLos Angeles, CA

    Will this fit a classical Yamaha GC12C guitar?

    Will this fit a classical Yamaha GC12C guitar?

    Open Reply - Gear-Support
    The Allparts Compensated Bone Saddle wil probably fit but replacing a saddle is not a "drop-in" operation unless it's branded by the manufacturer. Modification may be required.

  • submitted2 years ago

    asked byAnthony

    fromRiverbank Ca

    Hi I'm Tony W and I have a question. I have a Epiphone Hummingbird acoustic I need this part for will this work/fit?

    Hi I'm Tony W and I have a question. I have a Epiphone Hummingbird acoustic I need this part for will this work/fit?

    Open Reply - Gear-Adviser
    Yes but it's not just a drop in. It may need modification.

  • submitted2 years ago

    asked byLawrence

    fromNorth Carolina

    Is this can fit to yamaha fg3 red label?

    Is this can fit to yamaha fg3 red label?

    Open Reply - Gear-Support
    Yes, this will fit a yamaha fg3

  • submitted3 years ago

    asked byJojo

    fromAlanta,ga

    Does it fit a 12 string rouge gutiar

    Does it fit a 12 string rouge gutiar

    Open Reply - Kenneth
    No, this will not be compatible

  • submitted3 years ago

    asked byPaul

    fromundisclosed

    What is the radius on this saddle?

    What is the radius on this saddle?

    Open Reply - Thomas
    "Radiused top 3" x 7/64" x 11/32."

  • submitted3 years ago

    asked byJwall

    fromHenderson tx

    Will it work with a mitchell md100?

    Will it work with a mitchell md100?

    Open Reply - Kenneth
    Yes it will be compatible

  • submitted6 years ago

    asked byChris

    fromundisclosed

    Will work with a fender cd 60

    Will work with a fender cd 60

    Open Reply - Beau
    This bone saddle would work with a Fender CD60.

  • submitted6 years ago

    asked byShane

    fromMacon ga.

    Will this fit an epiphone PR-150? Thank you.

    Will this fit an epiphone PR-150? Thank you.

    Open Reply - Beau
    This saddle will fit an Epiphone PR-150.