Gallery
Description
Features
Specs
Warranty
Reviews
Q&A

Videos (1)

View Allarrow icon
ADJ Pinspot LED Quad DMXplay button

ADJ Pinspot LED Quad DMX

American DJ

collapse expand iconDescription

The ADJ Pinspot LED Quad DMX is a 8-Watt Quad Color (4-IN-1) Pinspot with red, green, blue and white diodes on one LED. It produces sharp 15-degree beams on light, and is designed to spot tables, decor, architecture or used for special effects.

The Pinspot LED Quad DMX comes with a wireless ADJ UC IR remote to control color fades, built-in shows, dimming, strobe, black out and sound activation. DMX connections allow users to connect and control multiple units at the same time from a DMX software or hardware controller.
American DJ Pinspot LED Quad DMX
American DJ Pinspot LED Quad DMX
American DJ Pinspot LED Quad DMX

collapse expand iconFeatures

  • 8W Quad (4-in-1) RGBW LED Pinspot (Rated at approximately 10,000 hours)
  • Operational Modes: DMX Controlled / Sound Active / IR Remote / Auto Run Programs
  • Beam Angle: 15-Degrees
  • Lumens: 740 @ 1M at 15
  • DMX Channel: 6 Channel
  • DMX Connections: 3-Pin DMX In / Out
  • Dimming: Adjustable via IR remote
  • Shutter / Strobe: Adjustable via IR remote
  • Flicker free
  • ADJ UC IR wireless remote included
warning

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • Power Consumption: 11W Max
  • Input Voltage: AC 100V-240V 50/60Hz
  • Dimensions: 8 x 4 x 2.75 / 205x98x61mm
  • Weight: 1 lbs / 0.4kgs

collapse expand iconWarranty

Warranty terms vary. Check with manufacturer for specific product warranty.

Featured Articles

collapse expand iconReviews

4

1 Reviews

100%

of respondents would recommend this to a friend

Filters
Cons
  1. Design Issues1
Describe Yourself
  1. Experienced1
Pros
  1. Easy To Setup1
  2. Long Beam Throw1

Reviewed by 1 customers

  • Good Value - needs some design changes.

    4

    submitted7 years ago

    byJL

    fromSalem OR

    Light could be brighter. A 10 or 12 watt LED would fix this. The most annoying issue is that the the power plug is a NEMA ( American Household) instead of a IEC type so you it is difficult to connect to other fixtures without an adapter. The DMX cables are a great feature but the cable length is about 16 inches which is fine if your stringing PinSpots together but not if your attaching it to other fixtures. 24 inch dmx cables would be make this light more versatile or just provide dmx plugs. The best design would be a single 24 inch input cable a plug for the output.

  • Previous
  • 1
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.