collapse expand iconDescription

The Ampeg SVT-410HLF Classic Series Bass Cabinet delivers the ultimate tonal versatility and sound quality that discerning bassists demand. This innovative 4x10" enclosure is specially tuned for enhanced low-end extension down to a thunderous 28Hz, enabling jaw-dropping sub-bass frequencies beyond the reach of traditional bass cabinets. Four high-output 10" speakers, each with 30-ounce magnets and 2" voice coils, work in concert to move tremendous volumes of air and generate tight, distortion-free bass across the entire frequency spectrum. A 1" compression driver provides crisp highs up to 4kHz for superb note definition and clarity. The SVT-410HLF's compact yet road-ready design, equipped with heavy-duty wheels and recessed handles, makes transporting this bass behemoth a breeze. Experience the Ampeg SVT-410HLF's unparalleled power, performance and portability.

Unmatched Low-End Extension

While most 4x10" cabinets bottom out around 40-50Hz, the SVT-410HLF dips down to a subterranean 28Hz for massive low-end rumble and depth. Its tuned, rear-ported enclosure and four specially designed 10" drivers work together to move air and produce bass frequencies far below the range of typical bass cabs. For players seeking to recreate the chest-thumping lows of a double 18" cabinet in a more compact, stage-friendly format, the SVT-410HLF is the clear solution.

High-Powered, High-Definition Performance

Four 10" speakers, each rated at 400 watts RMS, provide a combined power handling of 1,600 watts for volume levels suitable for any venue. But the SVT-410HLF is about more than just power—it's about fidelity. The 10" drivers feature 2" voice coils and 30-ounce magnets for tight, accurate bass reproduction across the cab's 28Hz-4kHz frequency range. A compression-driver horn tweeter extends high-frequency response up to 4kHz for shimmering highs and definition. The end result is a cabinet that keeps up with the most aggressive playing styles while maintaining tonal integrity at high volumes.

Road-Ready Design

While the SVT-410HLF produces seismic lows you can feel, its design is centered around portability. Recessed handles and an industrial-strength grip bar make loading and unloading the cabinet hassle-free. Four heavy-duty casters—two locking—enable the SVT-410HLF to be rolled into place and then secured. Skid rails protect the cabinet during transit and loading. The SVT-410HLF's compact footprint lets you achieve massive tone in a cabinet sized for tight stages.

Ampeg SVT-410HLF Classic Series Bass Cabinet
Ampeg SVT-410HLF Classic Series Bass Cabinet
Ampeg SVT-410HLF Classic Series Bass Cabinet

collapse expand iconFeatures

  • Ultra-low frequency response for bottom end that never ends
  • Rear wheels and recessed handles make transport easier
  • Skid rails for increased durability

collapse expand iconSpecs

  • Type: 4x10 bass enclosure
  • Freq response (+/-3db): 48hz-18khz
  • Usable low freq (-10db): 28hz
  • RMS power handling: 500 watts
  • Peak power handling: 1000 watts
  • Impedance: 4 ohms
  • Sensitivity: 98db spl 1w/1m
  • Maximum SPL: 125db
  • Components: 4 custom designed 100 watt 10" speakers, 1 high frequency horn
  • 30"W x 24"H x 19"D
  • 76 lb.

collapse expand iconWarranty

On May 1st, 2009, the Mackie, TAPCO, Crate, Blackheart and Ampeg websites will be updated with the addition of warranty URLs (e.g. www.mackie.com/warranty) expressing new A Stock warranty terms. These warranty URLs will go live on May 1st, 2009. Formerly, warranty periods for these LOUD brands appeared in a variety of locations – in product manuals (for Mackie and TAPCO) and on warranty cards and hang tags (for Crate, Blackheart and Ampeg). In order to streamline and clarify this process, Mackie, TAPCO, Crate, Blackheart and Ampeg warranty periods and terms will be communicated in full on the warranty pages. Any LOUD products purchased prior to May 1st will bear with them the manufacturer’s warranty as predates the new policy. Moving through this transition, in order for customers to obtain warranty service, both the sales receipt and a physical copy of the (older) warranty statement will be required by our Service and Support departments in order to issue Service Requests, etc. If the product was purchased on or after May 1st, 2009, but a physical copy of the older warranty terms is not presented, the new warranty terms and periods will apply. Meanwhile, the products that bear with them the new warranty periods (as reflected in the box contents of each product) are being tracked by serial #, and contain new warranty content referring customers to the appropriate brand website. The information below reflects the product warranty periods that will be effective on May 1st, 2009 for the Mackie, TAPCO, Crate, Blackheart and Ampeg brands: Mackie: A 3-year, nontransferable, inclusive warranty on electronics and a 2-year, nontransferable, inclusive warranty on drivers (where applicable) apply to loudspeakers (active and passive), power amps, powered mixers, and HR studio monitors. Specific models under this warranty include all SRM, HD, SA, C and S Series Speakers, all FRS Amplifiers, all HRmk2 Studio Monitors. A 1-year, all inclusive, nontransferable warranty applies to all mixers, MR Studio Monitors, Control Surfaces, Processors (digital), MR Studio Monitors, Control Surfaces, Audio/MIDI Interfaces, other SR & Recording Products. Specific product models under this warranty include all Onyx Compact, 4-bus and 8-bus, all VLZ3, all PPM, all ProFX, all CFXmk2 Mixers, all MR Studio Monitors, Big Knob, Onyx 800R, all MCU Pro family. Tapco: A 1-year, all inclusive, nontransferable warranty applies to all products and all models. Crate: A 1-year, nontransferable warranty applies to electronics and speakers on all models of MI amps, cabinets, and combos. 90-day warranty on all tubes Blackheart: A 1-year, nontransferable warranty applies to electronics and speakers on all models of MI amps, cabinets, and combos. 90-day warranty on tubes. Ampeg: A 5-year, nontransferable warranty on electronics and a 2-year, nontransferable warranty on speakers apply to all SVT Classic and Pro Series, MI amps and cabinets. A 2-year, nontransferable warranty on electronics and a 2-year, nontransferable warranty on speakers apply to all B Series, all Diamond Blue, and all BA combo amps. 90-day warranty on tubes.

collapse expand iconReviews

4.84

32 Reviews

100%

of respondents would recommend this to a friend

Most Liked Positive Review

5

The best 4x10 on the Market

This is the best 4x10 on the market. Its a little bigger than most but that is because of the 3 ports that alow this monster to push out the low lows. It is the essence of full range. It goes as low as a 15incher and hits the highs with clarity and sizzle. I've owned it for 9 months at the time of this review and have used it in various gigs and I'm still impressed with it. For a bass cab it has all the nessary features. It has two 1/4 inputs and two speakon inputs for connecting to the amp and adding an additional cab. It has a tweeter control knob to boost or cut the tweeter for more controle of your tone. It has wheels for transport and a bar that doubles as a towl rack when not transporting. Its 4ohm so it sucks a higher output of watts from your amp. It not only sounds great but it looks great as well. Its quite heavy at 110lbs. It has two big wheels and a bar in the back that helps with transport. I can lift it myself but if you're a little week in the knees and back you better have someone around to help you get it in and out of your vehical. All and all this is a great cab. I have owned the top of the line cabs from SWR and Eden and I've settled down with this beast becasue its the best. If anything were to happen to it I'd replace it with the same thing.

VS

Most Liked Negative Review

3

Decent cabinet, too expensive and extremely poor customer service from Ampeg.

I bought this cab in August of 2013. After the 30 day return period, I had the opportunity to use another of the same cab and found that my cab had bad speakers. They sounded bad at medium power. The cab I compared to was much better. I brought the cab to an Ampeg authorized service center. It has been 4 weeks now and Ampeg still hasn't supplied replacement speakers. I have since bought a Seismic Audio 1x15 and 2x10 cab combo and drive it with a Hartke 3500. The two were half the price of the SVT410-HLF and sound twice as good. When I get the SVT410-HLF back, I'm selling it immediately. I'm done with Ampeg...

Filters
Best Uses
  1. Performances5
  2. Outdoor Events / Games3
  3. Professional Recording3
  4. Home Studio2
  5. Amateur Recording1
Cons
  1. Bulky/Heavy1
Describe Yourself
  1. Professional Musician3
  2. Experienced2
Pros
  1. Good Audio5
  2. Easy To Use3
  3. Versatile2
  4. Durable1
  5. Awesome response1
  • I would buy this cabinet again.

    5

    submitted6 years ago

    byJimmy "Bassman"

    fromMissouri City, Tx

    Good sound, really kicks. I especially love the built on handle and wheels.

  • Great lows from ports, great highs from horn

    5

    submitted6 years ago

    byLes Paul 2550

    fromSW Florida

    Got this used from GC so I don't know about the tolex issues some have mentioned. Maybe that's a newer problem but this one was perfect. I paired the cab with an SVT-3Pro amp connected via 12 guage speakon cables and couldn't be happier. I mainly use it with recording and with the adjustable horn, I can get any tone for any genre I've thrown at it. I've also cranked the amp until everything in my whole house was rattling, doors, paintings, stuff on shelves. It sounded great. No nasty breakup, just glorious volume and tone. The ports on the bottom help this cab reach a bit lower than the Heritage model so I'm glad I got the classic model instead. Love the built-in wheels and towel bar handle. We've got the 8x10 big brother to this up at the studio I work but this thing is better for me. Tone is just as good as the 8x10 but at 160 pounds, no thank you. I don't know if I could even fit an 8x10 in my vehicle. Perfect cab for me.

  • Finally!

    5

    submitted7 years ago

    byDandy Don

    fromAcworth, Ga.

    I use the 410 HLF in a rock band but I also play funk and R & B with it as well. I use a Portaflex PF800 head that I just love and make no mistake about it, it's an Ampeg. Like most bass players I have played and owned all kinds of rigs from GK , Eden Highwayman, Fender, MusicMan, you name it? Nothing comes close to what I get out of this 410 HLF and the PF800. The preamp is a beast, the low and high boost is just the right amount of prodding the speaker needs to give me that warm yet fat round sound Ampeg is famous for. The mid-range selector is awesome in flexibility, scooping or boosting the mids. The port allows the low end to just roll out like a could of sound you feel. Crisp highs and mids, and the articulation is like nothing I have ever played before. Crazy this is I once owned a 610 HLF and a SVT Pro-3 and didn't like it. But this time around I'm loving it. Of course I have 3 custom build jazz basses as well, loaded with EMG J set pups, that helps. Finally, I'm happy with my sound. And I bought it used by trading in my two PF115 cabs.

  • yes

    4

    Verified BuyerVerified Buyer

    submitted7 years ago

    byIrvin

    fromundisclosed

    Tolex wasn't applied on the side properly

  • Amazing sound, awesome quality!

    5

    submitted8 years ago

    by5-Stringer

    fromHuntsville, AL

    Bought one cab when I started playing. Added another to put the low end in the room without blasting the volume. Play 4 & 5-string basses and dare anyone to find a cab that can cleanly lay down a low B like this Classic. Love standing on a stage and feeling the sound through my feet. Crisp when you need it, warm & thunderous lows without getting muddy - that's why I have 2 of them. A bit hefty, but will be the cab of choice for the long haul.

  • Buy this product.

    5

    Verified BuyerVerified Buyer

    submitted8 years ago

    byDAN

    fromundisclosed

    Completely satisfied. Great tone, easy to set up and the wheels make this great touring cabinet. Very sturdy. Highly recommend, especially for the quality you are getting at a great price.

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • asked byLex

    fromFt Smith Arkansas

    Currently using the Ampeg Venture 12, with this cabinet, Would this amp be too powerful and can blow the speakers?

    Currently using the Ampeg Venture 12, with this cabinet, Would this amp be too powerful and can blow the speakers?

    Open Reply - Gear-Support
    No, not at all.
  • asked byAl

    fromCastroville, TX

    What type of plywood is cab made of?

    What type of plywood is cab made of?

    Open Reply - Gear-Support
    Poplar-ply enclosure: 15mm.
  • asked bygordon

    frommississippi

    Thinking of changing speakers. What frequency is this cabinet tuned to?  (just the cabinet) How many cubic feet? These specs were not listed. Thanks!

    Thinking of changing speakers. What frequency is this cabinet tuned to? (just the cabinet) How many cubic feet? These specs were not listed. Thanks!

    Open Reply - Ronald
    Frequency Response (-3dB): 48Hz-18kHz,
  • asked bygordon

    frommississippi

    Whats the power rating?  RMS

    Whats the power rating? RMS

    Open Reply - Thomas
    "RMS power handling: 500 watts"
  • asked byLes

    fromRomulus, MI

    Can the rear wheels come off so it can he stacked on top of another 410HLF?

    Can the rear wheels come off so it can he stacked on top of another 410HLF?

    Open Reply - Kenneth
    you cannot remove the rear wheels
  • asked byDave

    fromNv

    What is the impedance?

    What is the impedance?

    Open Reply - Ronald
    It is 4 ohms.