Gallery
Description
Features
Specs
Warranty
Reviews
Q&A
Behringer

collapse expand iconDescription

The Behringer EUROPOWER EP4000 is a professional-grade stereo power amplifier packing enough juice to rattle your bones. Designed for massive live sound reinforcement, its dual channels each pump out a thunderous 2,000W of peak power into 2-ohm loads—more than enough to drive full-size PA rigs to face-melting levels. With the Behringer EUROPOWER EP4000 amplifier, you get earth-shaking volume and pristine sonic precision.

Massive 2,000W Peak Power Delivers Thunderous Volume

Packing high-current output transistors and a beefy toroidal transformer, the Behringer EP4000 delivers up to 2,000W of peak power per channel into 2-ohm loads. Connect it to large-format speaker arrays and you'll have all the amplification you need to fill stadiums, arenas and festival grounds with powerful, room-filling sound. The EP4000 puts out 1,400W per channel into 4 ohms as well—ideal for powering full-range mains and monitors. And running in bridge mode, it delivers a monstrous 4,000W into 4 ohms, enough for massive subwoofer arrays.

Accelerated Transient Response Ensures Punchy, Articulate Sound

Behringer's proprietary ATR technology gives the EUROPOWER EP4000 exceptional sonic clarity and detail. By improving the amplifier's slew rate and damping factor, ATR results in precise, punchy bass, articulate mids and shimmering highs. Snare hits snap with authority, guitar tones bite and cymbals shimmer with realistic decay. Vocals and lead instruments shine through the mix. Even at extremely high volumes, your sound stays clean and free of distortion thanks to ATR.

Low-Frequency Filters Remove Unwanted Bass

Unruly sub-bass frequencies can muddy up a mix and strain speaker cones. The EUROPOWER EP4000 lets you filter out excessive low end with adjustable high-pass filters on each channel. Set the filters anywhere from 10Hz–400Hz to remove sub-sonic rumble and tighten up low end. It's a great way to optimize your rig for the room without compromising headroom and dynamics.

Behringer EUROPOWER EP4000 Power Amplifier
Behringer EUROPOWER EP4000 Power Amplifier
Behringer EUROPOWER EP4000 Power Amplifier

collapse expand iconFeatures

  • 2 x 2,000 watts into 2 ohms; 2 x 1,400 watts into 4 ohms; 4,000 watts into 4 ohms (bridge mode)
  • Precise Power, Signal and Clip LEDs to monitor performance
  • XLR and 1/4" TRS input connectors for compatibility with any source
  • Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
  • Selectable low-frequency filters (30Hz or 50Hz) remove distracting infra-sound frequencies
  • Independent limiters per channel offer reliable protection against overload and distortion
  • High-current toroidal transformer for ultrahigh transient response and absolute reliability
  • Ultrareliable Toshiba/Fairchild power transistors
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
  • Back-to-front ventilation system, including air filter for reliable operation
  • "Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by Behringer Germany

collapse expand iconSpecs

Output Power
  • 20Hz–20kHz @ 0.1% THD, both channels driven:
  • 8 ohms per channel - 550W
  • 4 ohms per channel - 950W
  • 2 ohms per channel - 1,250W
RMS @ 1% THD (sine wave), bridged mode:
  • 8 ohms - 1,750W
  • 4 ohms - 2.400W
Peak Power, both channels driven:
  • 8 ohms per channel - 750W
  • 4 ohms per channel - 1,400W
  • 2 ohms per channel - 2,000W
Peak Power, bridged mode:
  • 8 ohms - 2,800W
  • 4 ohms - 4,000W
  • Distortion: <0.02%
Frequency Response:
  • At 10dB below rated output Power-20Hz–20kHz
  • At -3dB points: 5Hz–50kHz
  • Damping Factor: >300 at 8Î
  • Noise: -100dB unweighted, 20Hz–20kHz
  • Voltage Gain: 40X (32dB)
  • Input sensitivity: 1.15V (+3.4dBu) VRMS at 8 ohms
  • Input impedance: 10 kohm unbalanced, 20 kohm balanced
Controls:
  • Front: Power switch,gain control (channels 1 and 2)
  • Rear: DIP switches (10x)
Indicators:
  • Power: Green LED
  • Clip: Red LED, 1 per channel
  • Signal: Yellow LED, 1 per channel
  • Inputs: Balanced XLR and 1/4" TRS connectors
  • Outputs: Touch-proof binding posts and professional speaker connectors
  • Cooling: Continuously variable-speed fan, back-to-front airflow
  • Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection
  • Load Protection: Turn on/off muting, AC coupling
  • Output Circuit Type: Class H complementary linear output
Mains Voltage/Breaker:
  • 100–120V, 50/60Hz, 15 amps
  • 220–230V, 50/60Hz, 8 amps
  • Power Consumption: 2600W
  • Mains connector: Standard IEC receptacle
Dimensions
  • WxHxD: 19"x 3-1/2" x 15-4/5"
  • Weight: 37 lb.

collapse expand iconWarranty

1 year warranty. 3 year warranty if registered within 90 days of purchase.

Featured Articles

collapse expand iconReviews

4.83

6 Reviews

100%

of respondents would recommend this to a friend

Filters
Best Uses
  1. Performances1
Describe Yourself
  1. Experienced1
Pros
  1. Easy To Use1
  2. Good Power Output1
  3. Warm / Comfy1

Reviewed by 6 customers

  • Love this amp

    5

    Verified BuyerVerified Buyer

    submitted7 years ago

    byStephen

    fromUndisclosed

    Lots of power clear sound great price very happy

  • Impressed

    5

    Verified BuyerVerified Buyer

    submitted9 years ago

    byJB

    fromWillow Grove Pa

    Cheap. Solid. Sounds great heavy.

  • Beringer EP 4000

    5

    submitted14 years ago

    byMike S

    fromArlington Texas

    I have a classic rock band and since we purchased the Yamaha 2 x 18 cabs I thought they were lacking in punch.It turns out after we purchased the EP 4000 they came alive.We had the kick drum punch we were looking for.We have only used the EP 4000 once but I am way impressed.The price versus the power is unmatched in any amp I have seen.I am very happy with my purchase.

  • Great Deal...

    5

    submitted14 years ago

    byC. T. Cash

    fromLouisville, Ky

    I bought two of these to run a set of 2 X 18, 3000 watt subs. I was very skeptical of the name but was willing to give them a try. After all if they petered out I would bring them back and use the return policy, and buy Crown or QSC... Well I bridged the amps at 4 ohms, (4000 watts),and let them go....WOW what a pleasant surprise. They have preformed so well I have added two Europower 2500's to run my tops. These amps rock...never a problem and not any worries. The only down side is they are heavy but that is an age old problem....I got twice the power for half the cash! NO problems here...

  • AWESOME!!!

    5

    submitted15 years ago

    bycc

    fromst louis, Mi

    I Bought four of these bad boys for my rental pa's. At the price who could go wrong? Typically I use strictly Crown Macro or Mackie FR amps on low end. Let me tell you the Behringer EP 4000's Stood up to the test! After hours of constant chest pounding bass (4ohm briged) they sound good and have lasted over a year on the road in smoke filled clubs without maintanence or issue. The ONLY problems I have EVER had was from user issue. BUY THESE, WONT LET YOU DOWN!!!

  • Gets the job done

    4

    submitted15 years ago

    byJ-mobile dj/hobbyist

    fromCT

    The affordable price of this amp in no way means that this amp is "cheap". I only have 8 hours on the amp so far however one of those events had this thing pumping for 5 hours. The air blowing out stayed nice and cool and the case didn't feel too warm by the end of the night. I gave it 4 stars because I haven't logged high hours on it yet, the plastic channel knobs do not seem very durable and it is heavy. All in all I am very happy with this amp and reccommend it to anyone on a budget (or not on a tight budget). I have no doubt it will perform well every time.

  • Previous
  • 1
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.