Gallery
Description
Features
Specs
Reviews
Q&A
Furman

collapse expand iconDescription

The Furman PL-Plus C Power Conditioner delivers superior power conditioning and extreme voltage protection for your audio equipment. Featuring Furman's exclusive Series Multi-Stage Protection (SMP) technology and Linear Filtering Technology (LiFT), the PL-Plus C provides comprehensive protection against power spikes and surges. The PL-Plus C's rugged, rack-mountable chassis houses nine rear-panel outlets—including two isolated outlet banks to reduce interference—as well as one front-panel outlet, for a total output of 15 amps.

Series Multi-Stage Protection Plus Defends Against Surges

Furman's SMP+ circuitry incorporates multiple stages of surge suppression to handle even the most extreme power fluctuations, protecting connected equipment without compromising performance. The PL-Plus C's SMP+ circuit reacts in less than a nanosecond to clamp surges at 188 VAC, absorbing up to 6,500 amps of surge current. This extreme voltage shutdown capability powers down the unit and all connected gear in the event of hazardous over or under-voltage conditions, preventing damage.

Linear Filtering Technology Delivers Clean Power

Furman's LiFT filters noise and interference from the AC power line, isolating your audio components from EMI and RFI pollution that can compromise sound quality. The PL-Plus C's linear filtering, with zero leakage to ground, delivers a clean sine wave and maintains the integrity of the audio signal for optimal performance from your gear.

Convenient, Versatile Design

Occupying a single rack space, the PL-Plus C features a rugged, all-steel chassis with convenient front-panel controls and monitoring. Its built-in, retractable LED rack lights provide illumination for rear connections, with an on/off/dimmer control, while the front-mounted outlet offers easy access. The PL-Plus C's rear-panel voltmeter displays incoming voltage to instantly check power quality. A heavy-duty, 10-foot power cable and 15-amp circuit breaker are also included.

Comprehensive Protection and Power for Your Rig

For premium power conditioning and surge protection for your guitar amps, PA systems, recording equipment and more, the Furman PL-Plus C Power Conditioner is an ideal solution. With SMP+, LiFT, and versatile, performance-ready design, the PL-Plus C delivers clean, consistent power and defends your gear against damage from spikes and surges.

Furman PL-Plus C Power Conditioner
Furman PL-Plus C Power Conditioner

collapse expand iconFeatures

  • Retractable LED rack lights with on/off/dimmer control
  • Isolated outlet banks to minimize inter-component interference and noise contamination
  • BNC back panel connector for gooseneck lamp with front-panel switch
  • Maintenance-free surge suppression thanks to Series Multi-Stage Protection Plus (SMP+) circuit with extreme voltage shutdown
  • 8 rear-panel outlets and one front-panel outlet
  • LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised
  • Three widely spaced outlets accommodate bulky AC power transformers
  • LiFT (Linear Filtering Technology) with zero ground contamination
  • Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions
  • Segmented LED Voltmeter monitors and displays incoming line voltage
  • 15 amp rating, with high-inrush thermal circuit breaker for added protection
  • Two, pull out multi-LED, dimmable lamps
  • Captive 3/14 AWG, 10ft. black cord with NEMA 15 plug
  • One rack unit space
  • Master switch control of rear outlets

collapse expand iconSpecs

  • Dimensions: 19"W x 1.75"H x 10.5"D
  • Weight: 12 lbs.
  • Construction: Steel chassis, .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
  • Current rating: 15 amps
  • Operating Voltage: 90 to 139 VAC
  • Over Voltage Shutdown: 140 VAC typically
  • Spike Protection Modes: Line to neutral, zero ground leakage
  • Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133 VAC RMS
  • Response time: 1 nanosecond
  • Maximum surge current: 6,500 amps
  • Noise attenuation: 10dB @ 10kHz, 40dB @ 100kHz, 50dB @ 500MHz
  • Power consumption: 12W
  • Safety Agency Listings: CE, NRTL-C

Featured Articles

collapse expand iconReviews

5

4 Reviews

100%

of respondents would recommend this to a friend

Filters
Best Uses
  1. High-End Equipment2
  2. Having Around The House1
  3. Travel1
Describe Yourself
  1. Quality Oriented2
Primary use
  1. Personal2
  2. Business1
Pros
  1. Good Value3
  2. Reliable2
  3. Good Power Output1

Reviewed by 4 customers

  • Open Box, Great Value

    5

    submitted4 years ago

    byKevin R

    fromIndianapolis, IN

    Open box. Seems to work fine, front face slightly bent.

  • EVERY GUITAR PLAYER NEEDS FURMAN POWER

    5

    submitted5 years ago

    byLOBO59

    fromTemecula

    I RUN MARSHALL STACKS AND PEDAL BOARDS ALL THROUGH FURMAN PRODUCTS .FOR CLEAN POWER AND QUIET CHAOS WIDE OPEN

  • Great Power Conditioner

    5

    Verified BuyerVerified Buyer

    submitted8 years ago

    byGreg - Zolopht

    fromGrand Junction, Colorado

    Went on a forum bender for 4 days until I finally decided on this power conditioner. It's almost 50/50 on the interwebs on whether power conditioners are necessary. Bottom Line, this series of conditioner protects better and longer lasting than any normal surge protector. If you are putting a rack together anyway, you might as well protect the gear from the electric that goes into it. This will do the trick without severely breaking the bank. Highly Recommended.

  • protects the gear that is special to me

    5

    submitted15 years ago

    bymike

    fromBrentwood, CA

    this is great power conditioner. before i had this, i used to get power spikes when i played and it scared me, and some gigs i played, particularly the house, didnt have a great power supply, so the voltage was slightly high, and i would get static noise.no that i have this, all the noise is gone, i no longer can hear power spikes, and i no longer have to worry about my gear being damaged. for a week i had one of my amps at a practice space without the furman, and when i got it home, a surge built up in the transformer sent it into repais. coincidence? i think not. buy it

  • Previous
  • 1
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.