JBL

collapse expand iconDescription

The Control SB-2 provides low-frequency reinforcement in subwoofer/satellite systems. The
Control SB-2 is ideal for foreground music and music/paging systems in restaurants, retail establishments, theme bars, music cafes, health clubs, and other indoor applications. The unique slot-load vented design provides acoustic low-pass filtering. Compared to traditional bandpass subwoofers, the SB-2 offers superior musical clarity and bass impact. The satellite outputs are high-pass filtered, reducing overall system distortion by eliminating the need for the satellite speakers to reproduce frequencies in the low bass range. The satellites operate more efficiently, maintaining excellent midrange clarity and realism in music and paging. The high-pass filtering also allows a greater number of satellite speakers to be paralleled in the system by increasing the impedance the amplifier sees in the subwoofer range. The stereo inputs are 8 ohms each. The combination of the satellite high-pass filtering, the acoustic slot load filtering and a built-in second order low-pass crossover network results in smoother overall system frequency response and virtually eliminates the muddiness typical of other subwoofer/satellite systems by reducing frequency overlap in the low midrange.
JBL Control SB-2 10" Stereo Input Dual-Coil Subwoofer Black

collapse expand iconFeatures

  • Component: 10" (250 mm) dual voice-coil transducer
  • Stereo inputs with high-pass outputs for satellite speakers
  • Slot-load vented bandpass design
  • Complements full-range Control Contractor Series systems
  • High Sensitivity: 100dB, 1W, 1 m
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • Frequency Range (–10dB): 38Hz–160Hz
  • Continuous Program Power Capacity: 340W (both inputs driven); 170W (each input) x 2
  • Sensitivity: 100dB (1W, 1 m) at corner junction (pi/2 loading); 97dB, at two boundary junction (pi loading)
  • Nominal Impedance: 8 ohms per input; 4 ohms total with both inputs paralleled
  • Network Filter to Subwoofer: 12 dB/oct low-pass (per input), 160Hz
  • Acoustic Filtering: 6dB/oct low-pass filtering via slot-load design, 80Hz
  • Network Filter to Satellite Outputs: 6dB/oct high-pass (per output)
  • Satellite Impedance: 4-ohm load per Satellite Output recommended
  • Optimum System Configuration: Four JBL Control 23 satellite speakers (two on each SB-2 satellite output) provide optimum sensitivity balance and impedance loading, resulting in full-range 38Hz–22kHz system performance. Broadband impedance is 4-ohm per input x2 channels
  • Driver: 10" (250 mm) long-throw with dual voice coils
  • Enclosure Material: Particle Board
  • Terminations: Spring terminals, accepts banana plugs. Left In, Right In, Left Satellite Out, and Right Satellite Out
  • Installation Accessories: MTC-SB2W for installing SB-2 onto a wall or into a corner, MTC-SB2C for suspending SB-2 from ceiling
  • Dimensions (HxWxD): 5.5" x 23" x 13.5" (394 x 585 x 343 mm)
  • Weight: 42 lb. (19.1 kg)

Featured Articles

collapse expand iconReviews

Be the first to review the Product

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.