Kustom PA

collapse expand iconDescription

The PA50 PA System from Kustom combines quality performance and convenient features, all in a highly portable package. You'll find that the PA50 works well in a variety of environments, amplifying vocals, instruments, keyboards, drum machines, audio devices and more.

The two 4.5" speakers and high-frequency driver provide just the right combination of high and midrange sounds. This balance ensures your vocals cut through the mix while minimizing harsh and unwanted frequencies. The PA50 construction is based on the same tried-and-true techniques as the rest of Kustom's speaker line. This includes a heavy-duty steel grille and rigid corners. This model also utilizes a high-frequency driver for crisp, accurate reproduction of treble frequency and articulate speech.

For the soloist or acoustic duo, the PA50 works well when positioned on a standard speaker stand. As your following grows, so does your sound system; multiple units can be connected to increase the sound coverage in your venue of choice.
Kustom PA PA50 Personal PA System
Kustom PA PA50 Personal PA System
Kustom PA PA50 Personal PA System

collapse expand iconFeatures

  • Master Level control
  • Twin 4.5" drivers with high-frequency horn
  • Three-channel mixer
  • Two instrument/mic channels
  • One prerecorded music channel
  • Standard speaker standmount adapter built-in

collapse expand iconSpecs

  • Speaker: Two 4.5", 50W 4-ohm each
  • Gain Control: +70dB {Mic to Speaker Output (CH 1 & 2)}, +56dB {Line to Speaker Output (CH 1 & 2)}, +42dB {AUX IN to Speaker Output}
  • Auxiliary Input: CH3, 1/8" headphone/line live stereo, mixed mono
  • Dimensions (WxHxD): 7.5" x 18" x 6.5", (190 x 460 x 165 mm)
  • Weight: 14.7 lb. (6.7 kg)
  • EQ: 4kHz and above, 800Hz and below
  • Horn Type: 3-1/2"  piezo driver
  • Line Output: 50W, 8-ohm load
  • Microphone Input: CH 1 and 2, mic XLR balanced, line level 1/4" unbalanced

Featured Articles

collapse expand iconReviews

4.77

257 Reviews

97%

of respondents would recommend this to a friend

Most Liked Positive Review

4

Great for use as monitors!

I purchased two of the PA50s to use at gigs, where the stage does not allow space for floor monitors. I then bought speaker wall brackets that I attached to my existing large 18" 3-way JBLs. (Using lag bolts)Then, I suspend the PA50s on each JBL, (The PA50's have speaker top hats on the bottom for stand mounting. The brackets have the pole mount built in), pointing inward, as side fill. At chest level, it's perfect for monitors. It leaves open space on the small stages, and does a great job of being a fold-back system. On Large gigs, I point them outward, towards the audience, standing at extreme right and left. Or adjust them to be sidefill for very large stages. They work extremely well as monitor speakers. Going to buy another pair of PA50s and brackets, and mount the brackets on speaker stands, using muffler 'u' bolts / clamps, to hang them under the main speakers, on the tripod stand tube. Should work great for that set-up, as well.

VS

Most Liked Negative Review

1

Disappointing Sound Quality – Consider Alternatives

I purchased this product a couple of months ago for a small backyard gathering. From the start, the sound performance was underwhelming. The low mids were muddy, and while the highs were decent, overall clarity just wasn't there. If you're looking for better sound quality, I'd recommend saving your money and going with a powered Mackie speaker instead.

Filters
Best Uses
  1. Performances108
  2. Outdoor Events / Games90
  3. Home Studio81
  4. Amateur Recording40
  5. Pro Audio / DJ / Mixing33
Cons
  1. Limited Functions8
  2. Poor Sound Quality6
  3. Bulky/Heavy2
  4. Not Durable2
  5. Pricey / Poor Value2
Describe Yourself
  1. Experienced104
  2. Professional Musician45
  3. Novice30
  4. Child1
Pros
  1. Easy To Use165
  2. Compact159
  3. Good Audio156
  4. Lightweight135
  5. Versatile108
  • Great if you use within capabilities!

    5

    submitteda month ago

    byDave

    fromMemphis

    Great little speaker but it is not intended to fill a large space. I recommend using one, maybe even two, with a Kustom 10 or 12 sub to get best results! I've used a pair with a small sub with a trio… three vocals, guitar, bass, and drums…works great! Be realistic!

  • Just what I needed

    5

    Verified BuyerVerified Buyer

    submitted3 months ago

    byDan-Einar

    fromSanta Cruz, CA

    Submitted as part of a sweepstakes

    I need a personal PA that I can use with a guitar, a microphone , and a CD player (for backing tracks). It doesn't need to be loud, since it's for small venues (cafes, restaurants). With the PA50, I can plug in an acoustic-electric guitar OR the pedal board for electric guitar. I can switch back and forth easily during a gig, depending on what I want to play. And it sounds really good: rich, clear sound that fits my personal style perfectly. I recommend this!

  • Disappointing Sound Quality – Consider Alternatives

    1

    submitted4 months ago

    byAndy

    fromElk Grove

    I purchased this product a couple of months ago for a small backyard gathering. From the start, the sound performance was underwhelming. The low mids were muddy, and while the highs were decent, overall clarity just wasn't there. If you're looking for better sound quality, I'd recommend saving your money and going with a powered Mackie speaker instead.

  • It works perfect

    5

    Verified BuyerVerified Buyer

    submitted8 months ago

    byBill

    fromSourh Windsor, ct.

    Submitted as part of a sweepstakes

    I use it as a stand alone PA system at home and small places.

  • Light weight, good features

    5

    Verified BuyerVerified Buyer

    submitted8 months ago

    byBill

    fromPeachtree Corners, GA

    Submitted as part of a sweepstakes

    Light weight, accepts 2 XLR or 1/4", can be daisy-chained, can sit on floor or pole, good sound.

  • I have not had a chance to use it live but it coming thru

    5

    Verified BuyerVerified Buyer

    submitted9 months ago

    byFrancisco

    fromAustin Tx

    Submitted as part of a sweepstakes

    I am using it as stage monitor with my keyboard and accordion. I do like the volume control that I have and the highs and mids are coming out clearly. The lows well I did not expect too much, so I was not let down on then. I am considering another for practice very convenient to carry

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • asked byBlair

    fromWallingford,CT

    While using 2 of these Kustom PAs..
Can you patch your microphone into the Mic Input (XLR) and the Guitar Input (1/4)...into BOTH Input#1?

SAME INPUT?

    While using 2 of these Kustom PAs.. Can you patch your microphone into the Mic Input (XLR) and the Guitar Input (1/4)...into BOTH Input#1? SAME INPUT?

    Open Reply - Gear-Support
    No, you cannot use both the XLR (mic) and 1/4" (instrument) inputs simultaneously on the same channel (Input #1) of the Kustom PA50. Each channel is designed to accept either an XLR or a 1/4" input, but not both at the same time. Plugging into both inputs on the same channel may result in signal interference or improper functioning.
  • asked byG

    fromNorwalk

    Price

    Price

    Open Reply - Gear-Support
    I’m very sorry. I don't understand your question. The price is published.
  • asked byBernard

    fromBuffalo, NY

    what size speaker stand fits in the speaker mount?

    what size speaker stand fits in the speaker mount?

    Open Reply - Gear-Support
    The Kustom PA PA50 Personal PA System features a standard 1-3/8" (35mm) pole mount, which is the most common size for speaker stands.
  • asked byRob

    fromundisclosed

    Can these speakers be used as un-powered speakers? Thanks

    Can these speakers be used as un-powered speakers? Thanks

    Open Reply - Gear-Support
    Unfortunately, no.
  • asked byRobert Ollis

    fromChicago IL

    How do I daisy-chain two of them together, so as to have two speakers playing the same thing.  What extra cable do I need to purchase?

    How do I daisy-chain two of them together, so as to have two speakers playing the same thing. What extra cable do I need to purchase?

    Open Reply - Gear-Support
    To daisy-chain two Kustom PA PA50 Personal PA Systems so they both play the same signal, you can use the Line Out on the first unit to send the signal to the Line In on the second unit. Here's how to do it: Connect your audio source (like a mixer, instrument, or mic) to the first PA50 using one of its inputs. Use a ¼" TS or TRS cable (instrument or balanced line cable) to go from the “Line Out” jack on the back of the first PA50. Plug the other end into a ¼" input (such as "Line In") on the second PA50. Set volume levels appropriately on both units. Cable You Need: 1/4" TS (unbalanced) or TRS (balanced) male to 1/4" TS or TRS male cable. I recommend 1/4" TS (unbalanced)
  • asked bylou

    fromwestern NY

    Using 1 for vocals, 2 for guitar, will the aux input provide a decent sound connected to an electronic keyboard?

    Using 1 for vocals, 2 for guitar, will the aux input provide a decent sound connected to an electronic keyboard?

    Open Reply - Gear-Support
    The aux input on the Kustom PA PA50 will work for an electronic keyboard, but it's not ideal in terms of sound quality and control. Here's why: Pros: It works: The aux input accepts stereo unbalanced signals via 1/8" (3.5mm) TRS jack, so if your keyboard has a headphone or stereo line out, you can connect it directly. Quick setup: Simple and convenient for casual use or practice. Cons: No gain control or EQ: The aux input bypasses the main channel EQ and volume controls, limiting your ability to shape or balance the keyboard sound. Lower headroom: The aux input isn’t optimized for line-level instruments like keyboards, so the sound may be quieter or thinner compared to the mic/instrument channels. Mono speaker: While the aux input is stereo, the PA50 has a single speaker and sums the stereo signal to mono, so any stereo effects or panning from the keyboard will be lost.
  • asked byRobert

    fromMonroe ny

    Can you hook this to a ead system, do the cables come with the speaker

    Can you hook this to a ead system, do the cables come with the speaker

    Open Reply - Gear-Support
    I'm sorry. I don't understand the reference esd.
  • asked byNick R

    fromBoston, MA

    Does it have an output to get audio feed directly into a camera for press conference style events?

    Does it have an output to get audio feed directly into a camera for press conference style events?

    Open Reply - Gear-Support
    I'm not familiar with your camera. This does have an XLR line output.
  • asked byGina

    fromMurfreesboro tn

    What type of Amp/speaker should I buy for my e drums

    What type of Amp/speaker should I buy for my e drums

    Open Reply - Gear-Support
    Simmons DA2112 Advanced Drum Amp
  • asked byJesus

    fromMonterrey, Mexico

    If I want to connect a mixer, where do I connect the output channel of the mixer to the PA50...in or out?

    If I want to connect a mixer, where do I connect the output channel of the mixer to the PA50...in or out?

    Open Reply - Gear-Support
    Use one of the channel mic inputs for your mixer.