Gallery
Description
Features
Specs
Reviews
Q&A
Proline

collapse expand iconDescription

The ProLine 3-Tier Double X-Braced Keyboard Stand gives you the option of setting each level to a separate width. It can accommodate DJ equipment and mixers as well as keyboards. Features locking height and width adjustments, quick-release levers and fully welded contact points. You get maximum flexibility and support in any rehearsal, performance or scratch setting.
Proline PL403 3-Tier Double X-Braced Keyboard Stand

collapse expand iconFeatures

  • Double X-brace design
  • 3 separately adjustable tiers
  • Locking height and width
  • Quick release lever
  • Fully welded contact points
  • Supports medium to full-size keyboards
  • 50 kg/110 lb. maximum load rating
warning

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • Tier 1 adjusts from 31"–36"
  • Tier 2 adjusts from 45"–52"
  • Tier 3 adjusts from 59"–66"

Featured Articles

collapse expand iconReviews

3.8

20 Reviews

69%

of respondents would recommend this to a friend

This stand works perfect for me.
3 tier keyboard stand
Out-Stand-Ing

Most Liked Positive Review

4

A satisfactory spontaneous purchase

A reliably stable stand. I removed the middle-tier, and cut 6" off each of the rear footings. This allowed a snug fit against the wall. The stand is no longer suitable for free-standing use. I have an 88 weighted on the bottom, and a 49 synth above. The adjustments for the tier work best when centered vertically, but have poor alignment when shifted off center. For example, I wanted to the 49 to sit above the right side of the 88. Between the toothed locking mechanism and factory welds, it wasn't possible to get adequate alignment. Wouldn't mind support for a lower keyboard profile, but that might put too much stress on the button adjuster. It's a good & sturdy stand otherwise. Might be a bit heavy for regular travel.

VS

Most Liked Negative Review

3

Stable, but sloppy

I just replaced a single X-Braced stand with this one for a MOTIF XF8. The single X was WAY too wobbly, so after reading many reviews, and checking prices, this stand looked like it would work well. Sure enough, it is plenty stable, preventing the single X continuous wobble while playing, GREAT! Now, the XF feels solid while playing - for a 60+ pound keyboard, this really makes the stand worth the price (price was not too high - wait until you get the discount coupon from guitar center or your fave retailer . . . or find one at a low price on Craig's!). Here's the rub . . . Don't expect the three tiers to ever hold additional keys flat. Like a chair with a short leg - additional keys will need some crumpled paper or other means to keep them from jerking during play. Why ProLine didn't use an aligning jig when welding this together is beyond my understanding. I'm guessing that these are hand made somewhere (China? I didn't research this!) for bottom dollar. The teeth are NOT aligned well, and by the time you set up the third tier - forget it! Find some way to shim the keys on the additional tiers. At the $110 price point, does any manufacturer use an aligning fixture??? If you are a welder by trade, here is your million dollar opportunity! Just remember where you heard it! :D

Filters
Best Uses
  1. Home Studio12
  2. Amateur Recording6
  3. Performances4
  4. Professional Recording3
  5. Outdoor Events / Games1
Cons
  1. Heavy / Bulky3
  2. Unstable3
  3. Difficult To Transport1
  4. Flimsy1
  5. Not Functional1
Describe Yourself
  1. Experienced9
  2. Novice5
  3. Professional Musician3
Pros
  1. Holds Items Securely13
  2. Stable11
  3. Compact4
  4. Portable4
  5. Strong and Sturdy1

Reviewed by 20 customers

  • This stand works perfect for me.

    5

    Verified BuyerVerified Buyer

    submitted4 months ago

    byRobert

    fromFarmingville, NY

    Submitted as part of a sweepstakes

    This stand gives me great access to all 3 of my keyboards and is very stable. It is a perfect size for my home studio setup and I use it with my high stool to accommodate the height of each keyboard I'm playing. It feels very sturdy, light weight and was very easy to setup. I would recommend it to anyone out there using multiple keyboards.

  • I would buy this again

    5

    Verified BuyerVerified Buyer

    submitted9 months ago

    byMark

    fromYoungstown,Ohio

    Submitted as part of a sweepstakes

    I use Proline PL-403 to set up 1-88 key, 1-61 key and 1-37 key keyboard. This stand is stable and built very well.I use all Proline PL keyboard stands for my setup on a gig and in the studio.Very well made and priced right.

  • Solid product

    5

    Verified BuyerVerified Buyer

    submitteda year ago

    byTony

    fromLittle rock

    Submitted as part of a sweepstakes

    Product is as advertised

  • Proline 3-tiered Keyboard Stand

    5

    Verified BuyerVerified Buyer

    submitted2 years ago

    byErica

    fromTonawanda, New York

    Submitted as part of a sweepstakes

    Home studio recording

  • Junk that does not align...don't waste your time or money

    1

    submitted2 years ago

    byPaul

    fromFargo, ND

    No combination of settings can level the second and third tiers. I wasted almost an hour trying to get them to sit level. This is a very bad design, and I absolutely would not trust one of these with keyboards or synthesizers that have any value whatsoever. I will be returning this to the store tomorrow. Waste of time and money.

  • Works well with some finicky fiddling

    4

    Verified BuyerVerified Buyer

    submitted2 years ago

    byAndrew

    fromTacoma, Washington

    Submitted as part of a sweepstakes

    Great stand for storing and playing almost any synth; however the flexible arms are difficult to get lined up properly and the top tier is suitable only for lighter gear (it collapsed under a moog sub phatty which lead to some consternation onstage by yours truly). With those guidelines in mind, along with the aforementioned difficulties of transport, it works quite well for the price. Overall, nice work again by guitar center!

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • submitted3 years ago

    asked byStevie G

    fromSt. Paul, MN

    What is the weight capacity?

    What is the weight capacity?

    Open Reply - Kenneth
    Weight Capacity: 10 lbs. A.

  • submitted4 years ago

    asked byJist John

    fromChicago, IL

    Is it possible to order a replacement part? I have a stripped bolt :(

    Is it possible to order a replacement part? I have a stripped bolt :(

    Open Reply - Thomas
    I’m sorry but we don’t carry those types of parts available

  • submitted5 years ago

    asked byRich

    fromMN - Minnesota

    Will it support both genos and a xs8?

    Will it support both genos and a xs8?

    Open Reply - Kenneth
    Yes this will be compatible with both of those models

  • submitted6 years ago

    asked byArvie

    fromCerritos CA

    are this removable tier?

    are this removable tier?

    Open Reply - Beau
    The tiers are removable.