Gallery
Description
Features
Specs
Warranty
Reviews
Q&A

Videos (1)

View Allarrow icon
View Videoplay button

View Video

Radial Engineering

collapse expand iconDescription

The Radial X-Amp Active Reamplifier device provides a 100% Class-A signal path with 2 outputs to drive 2 amps. Has an input level overload LED indicator, an isolated output to eliminate ground loops, and a variable output level control.
Radial Engineering X-Amp Active Reamplifier
Radial Engineering X-Amp Active Reamplifier
Radial Engineering X-Amp Active Reamplifier

collapse expand iconFeatures

  • Active reamping device
  • 100% Class-A signal path
  • Two outputs to drive two amps
  • Input level overload LED indicator
  • Isolated output eliminates ground loops
  • Variable output level control
warning

WARNING: This product can expose you to chemicals including Titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer, and Lead, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • Input (XLR connector): Balanced 600 ohm, +4dB Line level, AES standard Pin-1 hot
  • Input level: +4dB balanced line level
  • Input impedance: 600 Ohms
  • Out-1 (1/4" connector): Unbalanced 10kOhm guitar signal, direct coupled
  • Out-2 (1/4" connector): 10k-Ohm guitar signal, transformer isolated
  • Output level: continuously variable
  • Output impedance: 5K-Ohms
  • Audio signal path: 100% discreet component Class-A circuit
  • Dynamic range: >100dB
  • Power requirement: 15VDC 400mA - center positive
  • Construction/finish: 14-gauge steel chassis & shell/baked enamel finish
  • Size: 3-5/16"W x 5"L x 1-7/8"D (84mm x 127mm x 48mm)
  • Weight (boxed): 2.6lb (1.8kg)
  • Warranty: 3 years limited (see owner's manual for details)

collapse expand iconWarranty

90 day warranty on footswitch and tubes. One year warranty on all other products.

Featured Articles

collapse expand iconReviews

5

2 Reviews

0%

of respondents would recommend this to a friend

Reviewed by 2 customers

  • Very simple for reamping

    5

    Verified BuyerVerified Buyer

    submitted7 years ago

    byKaleb

    fromundisclosed

    Works like a charm for reamping! Super simple! Be sure to buy a Hi-Z 1/4" Male-XLR Male Cable since your interface most likely won't have XLR output

  • Great Guitar recording tool!

    5

    submitted15 years ago

    byguitoffee

    fromSanta Monica, CA

    It's hard being Mr. recording engineer and Mr. guitar player at the same time. Especially when you are mic'ing your amp. As you are playing, you are always wondering if the tone coming form the amp is getting captured correctly or the way you want. This box allows you to be a guitar player and then tinker with your tone and mic placement for the recording later. This box was a life saver, as I recorded some tracks of my guitar direct late one night in my apartment. I then was simply able to "reamp" them in the studio later. This allowed me to keep the initial vibe of what I was playing and add the tone of my vintage amps later. These tracks ended up on the album my band released.... It's a very simple and flexible tool, built like a tank too.

  • Previous
  • 1
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.