Gallery
Description
Specs
Reviews
Q&A
American DJ

collapse expand iconDescription

This connector features 22 AWG stranded (0.15 x 19 ) tinned copper conductors, polyethylene insulation, twisted pair, polyethylene inner jacket, Duofoil (100% coverage) and cotton plus a tinned copper braid shield (85% coverage). PVC jacket.
American DJ 5-Pin DMX Lighting Cable 10 ft.
warning

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

collapse expand iconSpecs

Conductor
  • Number of Pairs: 2
  • Total Number of Conductors: 4
  • AWG: 22
  • Stranding: 0.15 x 19
  • Conductor Diameter: .0354"
  • Conduct or Material: TC-Tinned Copper
  • Insulation Material: PE Polyethylene
Lay Length
  • Lay Length: 1.1"
  • Direction: Left Hand Lay
  • Twists: 10.9 per foot
Inner Jacket
  • Inner Jacket Material: PE- Polyethylene
  • Inner Jacket Diameter: .055"
  • Pair Color Code: Green/Black/Red/White
Outer Shield
  • Outer Shield Trade Name: Duofoil
  • Outer Shield Type: Tape/Braid
Outer Shield Material
  • Layer 1: Material Trade Name--Duofoil, Type--Tape, Material--Aluminum Foil-Polyester, Coverage %--100
  • Layer 2: Material Trade Name--Duofoil, Type--Braid, Material--TC-Tinned Copper, Coverage %--85
  • Outer Jacket Material: PVC-Polyvinyl Chloride
  • Overall Nominal Diameter: .295"
  • Operating Temperature Range: -30 degrees C To + 75 degrees C
  • Bulk Cable Weight: 50 lbs./1000
  • Minimum Bend Radius (Install): 3.5"
  • Maximum Recommended Pull Tension: 22 lbs.
  • Nominal Characteristic Impedance: 110 Ohms
  • Nominal Capacitance Conductor to Conductor @ 1KHz: 12.5 pF/foot
  • Nominal Cap Cond. To Other Cond. & Shield @ 1KHz: 23 pF/foot
  • Nominal Velocity of Propagation: 76%
  • Nominal Delay: 1.6 Nanoseconds per foot
  • Nominal Conductor DC Resistance @ 20 degrees C: 24 Ohms/1000 feet
  • Individual Pair Nominal Shield DC Resistance @ 20 degrees C: 15 Ohms/1000 feet
  • Nominal Attenuation (dB/100 feet): 0.6 (@ 1 MHz) dB/100 feet
  • Maximum Recommended Current: 2.1 Amps per conductor @ 25 degrees C

Featured Articles

collapse expand iconReviews

5

4 Reviews

100%

of respondents would recommend this to a friend

Filters
Best Uses
  1. Back-Up1
  2. Concerts1
  3. Practicing1
  4. Stage Lighting1
Describe Yourself
  1. Experienced2
Pros
  1. Easy To Use2
  2. Functional1
  3. Good Quality1

Reviewed by 4 customers

  • Good Cable

    5

    submitted6 years ago

    byK.O.B.

    fromFlorida

    Use with my ADJ Par 3K Z100 Par 64 Cans, they only except 5 pin dmx cables.

  • Inexpensive DMX cable

    5

    Verified BuyerVerified Buyer

    submitted7 years ago

    byJMV

    fromundisclosed

    A DMX cable for our light system. Cable works great and costs less than trying to make it.

  • Great product!

    5

    Verified BuyerVerified Buyer

    submitted9 years ago

    byThomas the Tech Director

    fromGreenwood, IN

    It's used for DMX connections on lighting fixtures.

  • Great Quailty

    5

    submitted14 years ago

    byBob R

    fromFrederick, MD

    I bought some LED DMX lights and a controller, so, of course, I had to buy some cables to hook everything up. I have a truss behind the drummer and two smaller trusses on either side in front of the band. I needed some 25' cables to connect the trusses. Since DMX is like a computer network, you shouldn't use audio cable. I bought a few of these cables, hooked everything up, and then there was light. I would recommend these cables to anyone setting up a DMX light show.

  • Previous
  • 1
  • Next

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

No results but…

You can be the first to ask a new question.

It may be Answered within 48 hours.