Rogue

collapse expand iconDescription

The Rogue LX200BF fretless Series III bass guitar features an extended maple neck, rosewood fingerboard, covered traditional-style split and single-coil pickups, two volume and two tone controls, die-cast machine heads and black hardware. Rogue priced the 4-string LX200BF bass to make it easy to add a fretless to your arsenal.

A case is sold separately.
Rogue LX200BF Fretless Series III Electric Bass Guitar Metallic Blue
Rogue LX200BF Fretless Series III Electric Bass Guitar Metallic Blue
Rogue LX200BF Fretless Series III Electric Bass Guitar Metallic Blue

collapse expand iconFeatures

  • Basswood dual cutaway body
  • Bolt-on fretless maple neck with rosewood fingerboard
  • High-mass adjustable saddle bridge
  • J-style humbucker bridge pickup
  • P-style split coil neck pickup
  • Dual volume and tone controls
  • Die-cast tuners
  • Black Hardware
  • Case sold separately
warning

WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer, and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

collapse expand iconSpecs

  • 34" scale length
  • 24 frets

collapse expand iconReviews

4.23

57 Reviews

95%

of respondents would recommend this to a friend

Most Liked Positive Review

4

Not bad for what it is

This is a cheap fretless bass; therefore, I won't hold it to golden standards. When I first got it, I had to do a bridge adjustment for the E string. This took 15 seconds and the tool you need to do this is included with the bass so it's not a huge problem. Apart from that, it isn't all that bad. The neck is very comfortable and it sounds good with or without distortion. My only complaint is that there is hardly any sustain, but for this price you won't win them all. This is a good fretless bass for a beginner.

VS

Most Liked Negative Review

1

I wish I had never purchased this

This is by far one of the worst things I've ever purchased. Period. To be honest, I expected this guitar to be pretty low quality, but it was the cheapest fretless I could find, and I wanted a fretless, so I thought I would give it a go. I thought to myself, "It can't be THAT bad." I could never have been more wrong. When I picked it up from my local GC I checked to see if there was any shipping damage and was shocked when I found none. When I played it for the first time I noticed a plethora of issues: the G string tuning peg was much looser than the other three, the G string nut slot was filed down extremely low, the volume knob for the neck pickup was attached so incredibly bad that it would dig into the body of the guitar when rotated, the action was ridiculously high and the strings would buzz against the fretboard when I played on the "frets" closest to the nut (these were fixed with a truss rod and saddle adjustment, but still added insult to injury), and the strings that came with the guitar were awful (which was to be expected). The action was not difficult to fix, and I knew I could just replace the strings with better ones. I purchased a set of D'Addario EXL160BT to replace the terrible Rogue bass strings. As I was threading the E string through the bridge, the thick end of the string got stuck behind the hole. No amount of yanking, tugging, shoving, or twisting would get the string through the hole. I couldn't believe it. All four of the holes were exactly the same size, meaning the lowest string had to fit throught the same size hole as the highest string, which was not possible. I had to use a power drill to make the hole larger (which damaged the finish in many places), and after SEVERAL ATTEMPTS of drilling and testing to see if the string would go through, I was finally able to shove the string through the hole. I have never seen a bass that can't accomodate a specific gauge of string. The E string I was putting on was a 120. I should not have had any trouble putting it through the hole, but the hole was so incredibly small I don't even think a 110 would be able to fit through. I was finally able to get all the strings on. The strings sounded amazing and made this bass come alive after having the stock Rogue strings on it. With this guitar, I would say you get what you pay for, but even that seems like too much of an overstatement. You get way less than what you pay for. Don't buy this guitar. If you want a fretless, you're better off spending a couple thousand on a good fretless and not this piece of garbage.

Filters
Best Uses
  1. Practicing38
  2. Jamming28
  3. Recording21
  4. Small Venues17
  5. School Bands6
Cons
  1. Craftsmanship7
  2. Fret Buzz5
  3. Poor Pick Up5
  4. Flat Sound4
  5. Slight roughness to the wood, but easily fixable1
Describe Yourself
  1. Experienced27
  2. Professional Musician9
  3. Novice8
Pros
  1. Fun To Play42
  2. Good Feel33
  3. Good Tone23
  4. Good Pick Up16
  5. Solid Electronics13
  • I may upgrade!

    3

    submitted3 months ago

    byGUY

    fromPleasant Kenosha Wi.

    Added a bone nut, changed to flatwound strings, blacked out the side dots which were in a fretted basses position and added dots where they need to be. It does the job especially for someone wanting to try going fretless. I love it!

  • I might buy this again

    5

    submitted7 months ago

    byJackson

    fromHigh point

    I'm really in to primus so I got a frettless bass and for what I do it's great 5 stars ⭐️

  • Solid budget fretless!

    5

    submitted8 months ago

    byPK

    fromOregon

    So far, I'm loving this bass. Takes a few hours for the strings to stay tuned out of box, but the playability and sound is incredible. I'd easily recommend this bass to any bassist that needs (or wants) a fretless sound on a tight budget. And—no fret buzz when you don't have frets!

  • Great value

    4

    Verified BuyerVerified Buyer

    submitted9 months ago

    byWill

    fromAnnapolis, Maryland

    Submitted as part of a sweepstakes

    A great bass for the money. It plays well and gets that characteristic fretless PJ growl. The tone controls are not specific to either pickup, which is a little strange but a minor issue that could be worked out for those to whom it matters. If you need to add a fretless to your arsenal without breaking the bank, this one is for you.

  • yes i would buy this again

    5

    Verified BuyerVerified Buyer

    submitted9 months ago

    byRONALD

    frompalm springs ca

    Submitted as part of a sweepstakes

    unbelievable price, great action, fairly hot pickups. I don't know how China can made something like this for so little money.

  • I wasn't expecting the quality I received

    5

    submitted9 months ago

    byScott

    fromBradenton, FL

    I wanted to try a fretless bass, and most were $400 +, so I opted for this Rogue in case I wasn't able to play it, and was really pleasantly surprised when it came in. I put coated strings on it immediately and have been having great fun with it ever since. Mine didn't come with a rosewood "fretboard" it was a black acrylic, but I actually like it better.

collapse expand iconQ&A

Have a question about this product? Our expert Gear Advisers have the answers.

  • asked byRJ

    fromPima County AZ

    Will the guitar material construction be able to handle a heavier set of strings, but, in drop tune, should somewhat ease any extra string pressure, at least I would presume so

    Will the guitar material construction be able to handle a heavier set of strings, but, in drop tune, should somewhat ease any extra string pressure, at least I would presume so

    Open Reply - Gear-Support
    It should be handle to handle 50's. You'll probably need to adjust the rod.
  • asked byFred

    fromLake Forest, CA 92630

    Several reviews on this product have said that the edge dot markers on the neck aren't intonated correctly. I don't know if this was an older model or this one. 

Are they correctly intonated where the note should be played - for example, on the E String, G should be played ON the 3rd position dot marker. A ON the 5th. Etc, etc. etc. 

That's the correct setup for an unlined fretless neck. 

Is this the case?

    Several reviews on this product have said that the edge dot markers on the neck aren't intonated correctly. I don't know if this was an older model or this one. Are they correctly intonated where the note should be played - for example, on the E String, G should be played ON the 3rd position dot marker. A ON the 5th. Etc, etc. etc. That's the correct setup for an unlined fretless neck. Is this the case?

    Open Reply - Gear-Support
    Yes, they are correctly intonated.
  • asked byTBear

    fromOak Hills, Ca. 92344

    What Is The Nut Width, And Ceramic Or Alnico Pickups? Thanks!

    What Is The Nut Width, And Ceramic Or Alnico Pickups? Thanks!

    Open Reply - Gear-Support
    It's 1.65", Alnico pups.
  • asked byBrad

    fromWoodburn, Ky.

    Is a hard shell case available? Can't seem to find one.

    Is a hard shell case available? Can't seem to find one.

    Open Reply - Thomas
    Musician's Gear MGMBG Molded ABS Electric Bass Case
  • asked byFerg

    fromPoland

    what is the nut width?

    what is the nut width?

    Open Reply - Thomas
    I’m very sorry, the manufacturer has not made that information available. They're pretty narrow. Please give us a call if you would like some help 855-770-3373
  • asked byRichard

    fromBoca Raton, FL

    What is the length of the neck (detached from the body), from tip of headstock to the end of the bolt-on?

    What is the length of the neck (detached from the body), from tip of headstock to the end of the bolt-on?

    Open Reply - Kenneth
    Item Dimensions LxWxH 47.75 x 14.75 x 3.5 inches
  • asked byVeronica

    fromRaeford, nc

    Do u rent your bass guitars?

    Do u rent your bass guitars?

    Open Reply - Thomas
    That would be up to your local store.
  • asked byMark

    fromMassapequa NY

    What size is the jack input.

    What size is the jack input.

    Open Reply - Beau
    This bass has a standard 1/4" input.
  • asked byfieldminer

    fromAtlanta, Georgia

    Is this available in a left handed model?

    Is this available in a left handed model?

    Open Reply - Beau
    The Rogue LX200BL Left-Handed Series III Electric Bass Guitar is currently available.
  • asked byTonyJ.

    fromFlint Mich.

    Is it still on sale and for how long

    Is it still on sale and for how long

    Open Reply - Kenneth
    Please contact a Sales Agent for specific pricing inquiries
  • Previous
  • 1
  • 2
  • Next